How to solve the problem of extending the unlocking time of RFID card at building door station
How to solve the problem of extending the unlocking time of RFID card at building door station
The doorbell unlock time can be adjusted on the screen within a range of 2-10 seconds. However, the RFID card unlock time can be adjusted using the dedicated access control power supply (power controller) (2-15 seconds). If a customer's RFID card unlock time is too short and you need to adjust the RFID unlock time, you can switch the doorbell's power adapter to the power controller. You can then modify the unlock time (2-15 seconds) on the power controller. The outdoor doorbell is powered by the power controller, not the power adapter. There is a screw hole on the power controller that allows you to adjust the unlock time (2-15 seconds). This allows you to adjust the RFID card unlock time.
XSL-530
BJ-530
access control power supply (power controller)
access control power supply (power controller)
Note: If all monitors ring simultaneously when any button on the doorbell is pressed, please turn off the swipe mode on each monitor.
