1. Color TFT digital LCD screen, low power consumption without radiation, real wide display with high resolution.
2.Hands-free dual-way intercom，monitoring,unlocking and voiding disturbing during rest time function.
3.Bright /contrast/color/volume adjustment
4.There are 24 pieces beautiful chord music ringtone can be chosen
5.The outdoor unit with infrared night vision and waterproof function is made of abs, beautiful and durable,.The surface mounting is simple and safe, you can enjoy the happiness which is from the installation.
6.Each outdoor unit supports up to 6 indoor units .One indoor unit can support up to 6 outdoor units.(It needs a multigate controller when 3 or more outdoor units， video amplifier may be needed when 3 or more indoor units due to different wiring distances. Please contact us before purchasing)
Power: DC 12V-15V (provided by the indoor unit directly)
Camera : High definition and colorful CMOS/CCD(default CMOS)
Outdoor infrared night vision function: 10 LUX infrared
Outdoor unit installation method:surface mounting
1*2P lock wire
1*4P test wire
FAQ - Frequently Asked Questions
Q:How do I choose a connector?
A:RVV4×0.3/RVV5×0.3(Copper wires.more than 0.3 is not recommended)
CAT5E UTP cable(recommend)
2×1.0（≤ 5M）(Electric lock wire or power wire)
Q:What is the effective distance of the connecting wire?
A:It's a question of wiring distance.The wiring distance from the furthest outdoor unit to the furthest indoor unit
one indoor unit and one outdoor unit approximate 200M/660ft
two indoor units and one outdoor unit approximate 100M/330ft
The wired distance should be controlled within 30M/98ft when connected to up to 6 indoor units
Note:1.The door intercom system has 12v unlocking voltage signals, it can be directly connected with a 12v electronic
control lock(NO electronic lock). If any other type of electronic control locks is used, access control power
supply with(control +, control-)12V terminal control shall be available.
2.The entry button, NC electronic lock/NO electronic lock and power supply control are not accessories, you need to buy separately according to your needs
Voide disturbing function
Keep pressing the“intercom” button for 2 seconds in standby mode,it will enter into ''mute'' mode when the power light turn to bered. It has no effect on the image display,Press the "intercom " button again to restore ringtone.
Easy to install and DIY installation,You can cut the test wires and extend it.
Extension wires are not included,You need to buy separately according to your needs
recommend to use CAT-5 cable and RVV4*0.3,copper wires more than 0.3 is not recommended
We Will Send Applicative Power Adapter To Your According To Your States,(You can also note before payment)